Arama

Araştırma konularında bir kısıtlamaya gidilmeden, her alandan araştırmacının çağrılara başvuru yapması mümkün olacaktır. Ancak, proje kapsamındaki araştırma konularının tüm dünyada önem verilen “Yeşil Mutabakat” ile ilişkili olması gerekmektedir. 

Yeşil Mutabakat ve ilgili araştırma alanlarına dair hazırlanan bilgi notuna aşağıdaki, linkten ulaşabilirsiniz.

• Avrupa Yeşil Mutabakatı ve İlgili Araştırma Alanları

CoCirculation 3 Projesi kapsamında, doktora derecesine sahip araştırmacıların projelerini, kendi tercih edecekleri Türkiye’de yerleşik bir akademik veya sanayi kuruluşunda 24 ay boyunca bir danışman (süpervizör) eşliğinde yürütmeleri beklenmektedir.

2244-Sanayi Doktora Programının amacı, sanayide ihtiyaç duyulan doktora derecesine sahip nitelikli insan kaynağının üniversite-sanayi işbirliği ile yetiştirilmesi, sanayide doktoralı araştırmacı istihdamının teşvik edilmesi ve üniversite/araştırma altyapısı - sanayi işbirliğinin geliştirilmesidir.

Çağrı duyurusuna ulaşmak için aşağıdaki görsele tıklayınız.

Programın amacı, lise veya lisans eğitimlerine devam eden başarılı öğrencilere yurt dışında düzenlenen staj ve yaz/kış okulu gibi kısa süreli bilimsel eğitim etkinliklerine katılım için destek vermektir.

Çağrı duyurusuna aşağıdaki bağlantıya tıklayarak ulaşabilirsiniz. 

TRANSCAN-3 launches its 4th Joint Transnational Call for research proposals (JTC 2024) on the following topic: “Combination therapies against cancer: new opportunities for translational research” with the aim of promoting highly innovative and ambitious collaborative projects in translational cancer research at European and international level. The expected impact of the call is to improve the efficacy of personalized treatment of cancer patients through the development of new combinatorial treatment strategies, based on a better understanding of drug mechanistic functions and of their impact on the disease course.

The main purpose of this call will be design of patient preclinical models for combination therapies. Translational research using tumour samples collected from retrospective and/or prospective cohorts of patients. Proposals will have to cover only one of the three specific aims listed below.

Aim 1. Development of new tumour derived models to test new drug combination therapies.

Aim 2. Design and development of high-throughput drug combination screening platforms to test new combination therapies.

Aim 3. Use of immunotherapy and radiotherapy combinations strategies to overcome drug resistance.

The first stage of international project proposals will close on 05 July 2024 (12:00, CEST) through the PT-Outline Electronic Submission System exclusively. For Turkish researchers, the deadline for the first stage of national applications is 12 July 2024 (23:59, TSI). Consortia that receive a positive evaluation in the first stage pre-proposal will be invited to proceed to the second stage.

Call documents and other important information about TRANSCAN-3 JTC 2024 can be reached via the web site of the project.

TRANSCAN-3 JTC2024 Joint Call National Application Procedures Document (in Turkish) that contains the details for two two-stage national application process should be carefully examined before submitting an international application.

In case of interest in finding partners to the consortium, it is recommended to use the Partner Search Tool – Partfinder.

Contact Information

About International Application Procedures:
N. Selcan TÜRKER, PhD
selcan.turker@tubitak.gov.tr
0312 2981760

About National Application Procedures:
Kamil Öncü ŞEN
oncu.sen@tubitak.gov.tr
0312 2981809

The Technology and Innovation Support Programmes Directorate (TEYDEB) conducts the 1501-Industrial R&D Projects Grant Programme and the 1507-SME R&D Startup Grant Programme to support the project-based research, technology development, and innovation activities of Small and Medium-Sized Enterprises. Two calls are opened each year under these programs.

Applications for the TEYDEB 1501-Industrial R&D Projects Grant Programme and the 1507-SME R&D Startup Grant Programme for the first period of 2026 will start to be accepted as of 1 January 2026 through the application system. 

Call Timeline:

1507-SME R&D Startup Grant Programme 

1501-Industrial R&D Projects Grant  Programme Call 

1. In order to apply, an organization-based pre-registration application must be submitted to TUBITAK. The specified date is the deadline for sending the organization-based pre-registration application to TÜBİTAK via PRODİS. Pre-registration documents must reach TÜBİTAK at least one business day before the call closing date. If pre-registration approval cannot be given due to deficiencies in organization-based pre-registration documents, the responsibility belongs to the organization. There is no need to wait for the call opening date for organization-based pre-registration. For this reason, companies planning to apply for the call are recommended to carry out organization-based pre-registration without wasting time. 

2. Organizations that have previously received organization-based pre-registration approval will not pre-register on an organization basis again and will not send pre-registration documents. 

3. This is the deadline for project proposals to be sent via PRODİS. Organization-based pre-registration approval must be obtained for submission. 

Important Remınder: 

Since the project proposals will be sent with e-signature, the e-signature must be provided or, in case of e-signature, the e-signature validity periods must be checked, and the e-signature must be renewed if the e-signature expires until the call closing date.

The 1707 Order R&D Program aims to transform solution proposals designed to meet the needs of Customer Organizations into commercially viable outputs by SMEs through R&D activities. TÜBİTAK and Customer Organizations facilitate SMEs' need-oriented R&D activities through co-financing during this significant process. SMEs are executing innovative products and processes tailored to their customers. Ground is being prepared for sharing financing risks among industrial organizations and understanding intellectual property rights, allowing organizations with relatively more experience in project management to transfer their experiences to SMEs. 

Under the 1707 Order-Based R&D Projects SME Support Call, three separate call periods are planned for the year 2026. The draft schedule is as follows:

In the 1st Call Period, the SME Support Call for Order-Based R&D Projects 2026-1 (1707 Order-Based R&D 2026-1) has been launched.

Project applications will be accepted through the Technology and Innovation Funding Programs Administration (TEYDEB) Project Evaluation Monitoring System (PRODİS) between 2 January 2026 and 13 March 2026 (23:59, UTC+3).

Within the scope of the call announced under the 1707 Order-Based R&D Program – 1st Call Period of 2026, priority will be given to projects submitted under the Priority R&D and Innovation Topics under the Green Agreement Compliance.

For detailed information about the calls, you can access it here.

The Technology and Innovation Support Programmes Directorate (TEYDEB) conducts the 1501-Industrial R&D Projects Grant Programme and the 1507-SME R&D Startup Grant Programme to support the project-based research, technology development, and innovation activities of Small and Medium-Sized Enterprises. Two calls are opened each year under these programs.

Applications for the first period of 2026 for the TEYDEB 1501-Industry R&D Support Programme and the 1507-SME R&D Start-up Support Programme have started to be accepted via PRODİS. 

1507-SME R&D Startup Grant Programme – Current Call Timeline

1501-Industrial R&D Projects Grant  Programme – Current Call Timeline

Notes:

1. In order to apply, an organization-based pre-registration application must be submitted to TÜBİTAK. The specified date is the deadline for sending the organization-based pre-registration application to TÜBİTAK via PRODİS. Pre-registration documents must reach TÜBİTAK at least one business day before the call closing date. If pre-registration approval cannot be given due to deficiencies in organization-based pre-registration documents, the responsibility belongs to the organization. There is no need to wait for the call opening date for organization-based pre-registration. For this reason, companies planning to apply for the call are recommended to carry out organization-based pre-registration without wasting time. 

2. Organizations that have previously received organization-based pre-registration approval will not pre-register on an organization basis again and will not send pre-registration documents. 

3. This is the deadline for project proposals to be sent via PRODİS. Organization-based pre-registration approval must be obtained for submission. 

Important Reminder: 

Since the project proposals will be sent with e-signature, the e-signature must be provided or, in case of e-signature, the e-signature validity periods must be checked, and the e-signature must be renewed if the e-signature expires until the call closing date.

Within the framework of the Türkiye Green Industry Project carried out by TÜBİTAK and KOSGEB under the coordination of the Ministry of Industry and Technology with the support of the World Bank, the technical assistance services that SMEs will receive to meet the requirements within the scope of compliance with the green transformation requirements will be supported by the 1831 Climate-informed and Green Innovation Technology Extension Program

90% of the services that companies will receive from expert organizations on issues such as technology consultancy, capacity or situation analysis, detection of current problems and solution approaches and road map preparation for current green technologies will be covered by TÜBİTAK as grant support. The support period is maximum 6 months and the upper limit of the project budget is 210,000 TL. TUBITAK will ensure that this service for SMEs is provided through Solution Partners. The list of Solution Partners is below

1831 SOLUTION PARTNERS

2023-01 Call 

• ADANA SANAYİ ODASI EĞİTİM VE DANIŞMANLIK A.Ş.
• ANKARA SANAYİ ODASI
• BESENVE ENERJİ A.Ş.
• BEYKOZ GAYRİMENKUL YATIRIM İNŞAAT TURİZM SAN. TİC. A.Ş (ALLIANZ TEKNİK)
• CGE SÜRDÜRÜLEBİLİRLİK DEĞERLENDİRME VE YAZILIM HİZMETLERİ A.Ş
• DCUBE DÖNGÜSEL EKONOMİ DANIŞMANLIK VE SÜRDÜRÜLEBİLİRLİK TİC. A.Ş.
• DETAY İNOVASYON ÇEVRE EĞİTİM VE DANIŞMANLIK HİZMETLERİ LTD. ŞTİ.
• ESKİŞEHİR SANAYİ ODASI
• ETKİN PROJE YÖNETİM DANIŞMANLIK TİC. LTD. ŞTİ.
• GAZİ ÜNİVERSİTESİ TEKNOLOJİ TRANSFER OFİSİ A.Ş
• GAZİANTEP SANAYİ ODASI MESLEKİ EĞİTİM DAN. HİZMETLERİ A.Ş
• GEBZE TEKNİK ÜNİVERSİTESİ TEKNOLOJİ TRANSFER OFİSİ A.Ş.
• GTE KARBON SÜRDÜRÜLEBİLİR ENERJİ EĞT. DAN. TİC. Ve A.Ş.
• INNOPARK KONYA TEKNOLOJİ GELİŞTİRME BÖLGESİ YÖNETİCİ A.Ş.
• İSTANBUL SANAYİ ODASI BELGELENDİRME A.Ş
• KONYATEKNOKENT TEKNOLOJİ TRANSFER OFiSi LiMiTED ŞİRKETi
• MESS TÜRKİYE METAL SANAYİCİLER SENDİKASI
• ÖZYEĞİN VE BEYSAD DİJİTAL TEKNOLOJİ SANAYİ DÖNÜŞÜM MERKEZİ A.Ş. (ÖZÜBEX)
• SAGENİT YÖNETİM HİZMETLERİ ORG. SAN. TİC. LTD. ŞTİ.
• SDG MÜHENDİSLİK DANIŞMANLIK VE EĞİTİM HİZMETLERİ A.Ş.
• TSE GLOBAL-ULUSLARARASI UYGUNLUK DEĞERLENDİRME SERVİSİ A.Ş.
• TÜRKİYE İHRACATÇILAR MECLİSİ (TİM)
• TÜRKİYE TEKNOLOJİ GELİŞTİRME VAKFI (TTGV) 
• ÜNİVERSİTE SANAYİ İŞBİRLİĞİ MERKEZLERİ DERNEĞİ AR-GE İKTİSADİ İŞLETMESİ (ÜSİMP)
• YILDIZ TEKNOLOJİ TRANSFER OFİSİ A.Ş

2024-02 Call

• ANTALYA TİCARET VE SANAYİ ODASI(ATSO)
• BAŞKENT ORGANİZE SANAYİ BÖLGESİ 
• CABİR TEKNOLOJİ TRANSFER OFİSİ LİMİTED ŞİRKETİ 
• CARBON HİNTS EĞİTİM MÜHENDİSLİK DANIŞMANLIK LTD. ŞTİ.
• CC ARGE YAZILIM VE DANIŞMANLIK TİCARET VE ANONİM ŞİRKETİ
• ECONATURE DANIŞMANLIK HİZMETLERİ LTD. ŞTİ
• EKOBIL ÇEVRE HIZMETLERI DANISMANLIK EGİTİM TARIM HAYVANCILIK MADENCILIK INSAAT İTHALAT IHRACAT TURIZM VE TIC. LTD.ŞTİ.
• EKOL ÇED ÇEVRE YÖNETİM HİZMETLERİ SANAYİ VE TİCARET ANONİM ŞİRKETİ
• ESA ÇEVRE TEKNOLOJİLERİ MÜH. DANIŞ. HİZM. VE TAAH. İNŞ. İTH. İHR. SAN. VE TİC. LTD. ŞTİ.
• GREENLİFE DANIŞMANLIK MÜHENDİSLİK EĞİTİM VE TASARIM HİZMETLERİ TİCARET LİMİTED ŞİRKETİ
• IQ BAĞIMSIZ DENETİM A.Ş.
• IQ PARTNERS TEKNOLOJİ EĞİTİM VE ARGE DANIŞMANLIK A.Ş.
• İNNOEM İNOVASYON EĞİTİM MÜHENDİSLİK SANAYİ VE TİCARET LTD. ŞTİ.
• KARADENİZ TEKNİK Ü. TEKNOLOJİ TRANSFER OFİSİ
• KAYSERİ MODEL FABRİKA
• KOCAELİ ÜNİVERSİTESİ TEKNOLOJİ TRANSFER OFİSİ ANONİM ŞİRKETİ 
• KONYA SANAYİ ODASI MESLEKİ EĞİTİM VE DANIŞMANLIK HİZMETLERİ A.Ş.
• MARMARA TEKNOKENT A.Ş. 
• SAKARYA ÜNİVERSİTESİ TEKNOLOJİ GELİŞTİRME BÖLGELERİ YÖNETİCİ A.Ş.
• SOME CARBON ENERJİ VE KARBON TEKNOLOJİLERİ SANAYİ TİCARET ANONİM ŞİRKETİ
• SUSTABLE İKLİM VE ENERJİ TEKNOLOJİLERİ ANONİM ŞİRKETİ
• 3PMETRICS SÜRDÜRÜLEBİLİRLİK VE TEKNOLOJİ ANONİM ŞIRKETİ

Contact: yesilsanayi.mentor@tubitak.gov.tr

The following points should be taken into consideration during the application:

• The Principal Investigator (PI), researchers and consultants should register in the TUBITAK - Researcher Information System (ARBIS) Database and their records should be up-to-date,
• The PI, researchers and consultants should reside in the territory of Republic of Türkiye (Non-Turkish citizens can be PI/researcher/consultant in a project if they are working in an institution located in Türkiye.),
• "Limits for Taking Part in Projects" for PI and researchers should not be exceeded,
• Not to apply to another program with the same project proposal before the evaluation procedure is concluded (In case of multiple applications, the first application is taken into consideration, the other project application is returned without being evaluated),
• To fill all the titles in the application form completely and with sufficient information to evaluate the project scientifically,
• To use the most up-to date format of the application form which is available on the Online Application System, and to prepare the application in Turkish(*) (excluding abstract in English and international publications given as reference)
• The application form should not exceed 12 pages except Annex-1 References and Annex-2 Budget and Justification,
• In case the same/similar project proposal has been submitted previously and rejected as a result of scientific evaluation, "Project Proposal Modification Form" created automatically by the system in line with the information entered into the Electronic Application System should be filled in considering all the comments/corrections given in scientific evaluation report.
• The statements in proposal text should not be substantially similar to the statements in the projects previously submitted to our Institution (including the projects ongoing and concluded),
• The members of the project team should not have ongoing, concluded or recently proposed projects submitted to TÜBİTAK or to a different institution/organization with the same/similar content of the proposal,
• The proposal should not include field work in abroad,
• The amount of fund requested from TÜBİTAK should not exceed the budget upper limits determined for the “1002-A Short-Term Support Module” (The amount of fund requested in "General Budget Table” in the “Annex-2 Budget and Justification” should not differ from the amounts requested during the online application.),
• The plan for field study carried out within the scope of the project should be submitted,
• In case of doctorate students / specialization students in medicine, dentistry, pharmacy, veterinary medicine /proficiency in arts students are the PI, the project proposal shall be submitted with justification of meeting the needs that arise during the execution of the doctoral theses (If the PI is a doctoral student; the thesis supervisor cannot be a researcher, but a supervisor.),
• To complete the steps in the Online Application System completely, making sure that the files uploaded to the system are openable and correct,
• The e-signature process must be completed within 15 days (The project team - the PI, the researcher(s), the consultant(s) - the rights holders other than the project team, the doctoral thesis advisor if the PI is a PhD student, and all the executive/participant institutions/organizations must have qualified electronic certificates),
• As an authorized officer for e-signature; the signature of the Rector or authorized Vice Rector in universities and hospitals /institutes affiliated to universities, Hospital Director, Chief Physician or authorized Deputy Chief Physician in hospitals, the General Manager or Deputy General Manager / President or Deputy President for other institutions is required,
• The project shall comply with the research project criteria, should not be a routine study for the assessment of current situation or data collection,
• The project should not be aimed at building infrastructure,
• The list of references attached should be associated with the text, and all the studies referred in the project proposal should be included in the list of References,
• To determine whether the project requires an Ethics Committee Approval and Legal / Private Permit. If required, in case the project is decided to be supported, the documents should be submitted fully within the time given and in desired format. If the documents cannot be obtained within the given time, the project will not be implemented. Thus, the application to the relevant organizations to get these documents should not be delayed. (Ethics Committee Approval Information, Legal/Private Permits Information),
• If an application was previously submitted to TÜBİTAK with the same project proposal, and it is evaluated as insufficient in terms of the scientific excellence criterion twice, an application cannot be submitted for the third time with the same project proposal.
• If an application has been made to the 1002-A Short-Term Support Module with the same project proposal, and if the project is not found appropriate to be supported 3 times as a result of the scientific evaluation, within the scope of this Module, not to apply to the 1002-A Short-Term Support Module for the 4th time with the same project proposal,
• The persons working in TÜBİTAK Headquarters/ Institutes shall not be included in the project team as PI / researcher/consultant.

(*) It is possible for foreign nationals to fill in the Application Form and its annexes in English; however, the language to be used in the Application Form and the Final Reports to be prepared during the monitoring process must be the same.

Scope of the Support

Within the scope of 2205-Undergraduate Scholarship Program, support is given for Turkish Citizens who received medals in the National Science Olympiads, the International Science Olympiads and the International Project Contest as well as having undergraduate education on basic science and social sciences programs determined by TÜBİTAK.

Lightweighting technology is a strategic technology field that improves performance while reducing environmental impact and requires a multidisciplinary approach at the intersection of materials, design, and digitalization. Within the scope of Eureka Network Projects, one of Eureka’s key support mechanisms, the international call on “Lightweighting Technologies” was opened on 6 May 2026 with the participation of 12 countries, including Türkiye. The call is carried out with the participation of organizations from different countries and supports projects aimed at developing market-oriented products, processes, and services with high commercialization potential.

Objective of the Call:

Lightweighting technologies aim to reduce the weight of products while maintaining or improving their performance, optimizing material use, and improving energy efficiency. In this context, the following elements are considered together:

• Advanced materials technologies

• Smart design approaches

• Optimized production processes

• Digital modeling and simulation tools

Call Topics:

Projects to be submitted under the call may cover, but are not limited to, the following areas:

1. Lightweight design and optimization

2. Advanced and lightweight materials

3. Recycling and sustainable material use

4. Joining and assembly technologies

5. Additive manufacturing technologies

6. Digitalization and modeling tools

Applications:

This call promotes the development of sustainable and competitive solutions by supporting industry-oriented R&D and innovation activities.

Applications will be carried out in two stages, international and national:

Stage 1: International Application: All partners must complete the Eureka project application form available on the call web page online.

Stage 2: National Application: Participants from Türkiye must submit their national applications to the TÜBİTAK 1719–Eureka Lightweighting Technologies national call by 2 December 2026, together with the international application form.

Applications for Eureka Network-Lightweighting Technologies projects will be carried out within the framework of the national call rules under the 1719-Eureka Lightweighting Technologies code and the national call announcement titled Eureka Network 2026 Lightweighting Technologies Call Announcement.

Companies with capital company status in Türkiye, higher education institutions, public research centers and institutes, training and research hospitals, and research infrastructures within the scope of Law No. 6550 may apply to the call coded 1719–Eureka Lightweighting Technologies. Applications from these institutions are accepted only in partnership with at least one capital company. In the projects submitted under the call, the capital company must be the Project Coordinator Organization (Correspondent Organization).

Before submitting the national application, the call text must be carefully reviewed; failure to comply with the application rules may result in the application being returned without being evaluated. The national call document is provided below.

Click here for the Eureka Network-Lightweighting Technologies international call text. 

Call Timeline:

International Call Opening Date: 6 May 2026

International Call Closing Date: 8 October 2026 (14:00, UTC)

National Call Opening Date: 8 October 2026

Deadline for Organization-Based Pre-Registration: 1 December 2026 (23:59, UTC+3)

Deadline for National Project Applications: 2 December 2026 (23:59, UTC+3)

Contact:

For the International and National Application Process:

Emine Elif Ocakcı

eureka@tubitak.gov.tr

1719@tubitak.gov.tr

Başkanlığımız bünyesinde yürütülen 2204-A Lise Öğrencileri Araştırma Projeleri Yarışması Programı kapsamında 2025 yılında 12 alanda 37.206 öğrencinin hazırlamış olduğu 22.586 projenin başvurusu yapıldı. 

Başvurusu yapılan projeler yarışmanın ön değerlendirme aşamasında ülkemizde çeşitli üniversitelerde görev yapan akademisyenler tarafından değerlendirildi ve bu değerlendirme sonucunda 1.200 projenin sahibi toplam 2.488 öğrencimiz bölge yarışmasında projelerini sergilemeye hak kazandı.

Bölge yarışmalarına davet edilen projelerin listesi ve bölge yarışmalarına ilişkin detaylı bilgiler için tıklayınız.

Yarışmanın bölge aşamasına davet edilen öğrencilerimizi tebrik eder, başarılarının devamını dileriz.

Araştırma Destek Programları Başkanlığı tarafından 1002-Hızlı Destek Programı altında yürütülen 1002-A Hızlı Destek Modülü ve 1002-B Acil Destek Modülü kapsamında iyileştirme çalışmaları gerçekleştirilmektedir. Bu doğrultuda, mevcut başvuru formları ile sunulacak proje önerilerine ilişkin çevrim içi başvuruların ARDEB Proje Başvuru Sistemi (PBS) üzerinden 27/04/2025 saat 23.59’a kadar tamamlanması gerekmektedir. 27/04/2025 saat 23.59’a kadar onaylanan proje başvurularının elektronik imza süreçlerinin bu tarihten sonra tamamlanabilmesi mümkündür. 28/04/2025 tarihinden itibaren mevcut formlar ile başvuru yapılması mümkün olamayacaktır. 

1002-A Hızlı Destek Modülü ve 1002-B Acil Destek Modülünün yeni süreçlerine ve başvuru formlarına ilişkin bilgilendirme 28/04/2025 tarihinden sonra duyurulacaktır.

Program kapsamında araştırmacılara aylık 27.000 TL(tam) ve 7.500 TL(kısmi) burs verilmektedir. Araştırmalarını yürütmeleri için 150.000 TL’ye kadar araştırma desteği sağlanmaktadır. Araştırmacılar ayrıca “Yurt İçi ve Yurt Dışı Bilimsel Etkinliklere Katılım Desteği” programlarının katılım koşullarını sağlamaları halinde direkt destek alabileceklerdir. Araştırmacılar, destek kazandıktan ve araştırmalarını tamamladıktan sonra 12 ay içerisinde “Bilimsel Eğitim Etkinlikleri Desteği” programına başvuru yapabileceklerdir. Başvuru yapılması halinde, programa başvuran diğer adaylardan ayrı olarak baraj puanı belirlenecektir. Başvuru sistemi 03 Haziran 2024 – 12 Temmuz 2024 (17.30) tarihleri arasında başvuruya açık olacaktır.

Programın 2024 yılı 1. dönem çağrı metnine program web sayfasından erişilebilir

Başvurular iki aşamada değerlendirilir.

Ön İnceleme

Ön inceleme aşamasında başvuru belgeleri kontrol edilmektedir. Başvuru süresi içinde yapılmayan, başvuru koşullarından herhangi birini sağlamayan, belgeleri eksik olan veya istenilen formatta olmayan, başvuru son günü mesai bitiminden sonra gelen faks/elektronik posta ile yapılan başvurular bilimsel değerlendirmeye tabi tutulmadan iade edilir. Ön inceleme Bilim İnsanı Destek Programları Başkanlığı tarafından yapılır.

Bilimsel Değerlendirme

Bilimsel değerlendirme aşaması ön inceleme süreci neticesinde evraklarının eksiksiz olduğu tespit edilen adaylar, Prof. Dr. Aziz SANCAR’ın koordinasyonunda belirlenen bir değerlendirme kurulunca TÜBİTAK Bilim İnsanı Destek Programları Başkanlığı koordinesinde yapılacaktır.  Nihai değerlendirmede destek almaya hak kazanacak adaylar Prof. Dr. Aziz SANCAR tarafından belirlenecektir.

* It was published in the Official Gazette dated 08.06.2022 and numbered 31860.

The tender for the exclusive licensing of the "Protective Lozenge/Chewable Tablet against SARS-CoV-2 Virus" Technology for 7 (seven) years was held on 21.06.2022.

For detailed information, please send an e-mail to tto@tubitak.gov.tr.
 

The projects to be submitted to international calls should be submitted to TÜBİTAK in accordance with the evaluation calendar of the relevant call.

The document indicating that the national application is eligible and the international application form must be attached to the AGY103 appendices section.

At the project application date, there must be at least one person with a bachelor’s degree related to the project subject in the project team.

Institutions/organizations based in Turkey that apply to the Eureka international program and whose international preliminary review is found positive can apply to the Eureka Network Project 2024 Applied Quantum Technologies National Call (1719- EUREKA QUANTUM TECHNOLOGIES). Applications made in this context are evaluated by expert referees during company visits and then reported to TÜBİTAK.

TUBITAK 2501 program is always open for the application of Turkish Research Groups but there are application.

On the other hand, US Research Group needs to find a suitable funding program among any of NSF grants open for application. Consequently, the NSF grant program and its deadline vary depending on the thematic field and the NSF division conducting the program.

The results of the 1832 Green Transformation in Industry 2024-1 Call, which was opened within the scope of the World Bank Türkiye Green Industry Project and aims to support the green transformation of our country's industry, have been announced.

A total of 73 project applications were submitted for the 1832-2024-1 call. It has been decided to support 40 of these projects. You can access the list of supported projects and rejected projects via the links below.

We congratulate the organizations whose projects have been supported, and remind those whose projects were rejected that they can revise their applications and apply for the upcoming 1832 Calls.

We would like to extend our thanks to the Board Members and reviewers who contributed to the project evaluation process.

Firms can access the latest status of their project proposals through the project information page on the eteydeb.tubitak.gov.tr website.

For accepted projects the support letters, the reimbursable support contract, the project contract, and its annexes; for rejected projects, the detailed rejection explanations will be sent to the firms' KEP (Registered Electronic Mail) addresses. The printed contracts will not be sent to the firms. Instead, the firms will print one copy of the contracts attached to the support letter, sign it, and send it to TÜBİTAK via post/courier.

The results of the 1501 Industrial R&D Projects Grant Programme 2024-2 Call, which aims to encourage Small and Medium-sized Enterprises (SMEs) to carry out R&D qualified innovation activities and to increase localisation in the required technology areas by improving their R&D capacities, are announced.

You can access the lists of projects that were decided to be supported and projects that were rejected from the links below.

We congratulate our organizations whose projects were included in the scope of support, and we would like to remind our organizations whose projects were rejected that they can revise their applications and apply for the 1501 2025-1 Call.

We would like to thank our Board members and referees who took part in the evaluation processes of the projects for their valuable contributions.

Companies can access the latest status of their project proposals from the project information page at eteydeb.tubitak.gov.tr.

The scope of support and contracts for accepted projects will be sent to the KEP addresses. Organizations must sign the contracts according to the information note sent and send a copy to TÜBİTAK. The reasoned rejection decision for rejected projects will be sent to the organizations' KEP addresses registered in the PRODIS system.

Within the scope of call for proposals launched by TÜBİTAK and AA, 3 collaborative research projects are found eligible to be funded. 

2570 - Bilateral Cooperation Support Program with the Agricultural Academy of Bulgaria (AA) 2024 call scientific review process has been concluded. Information on the 3 projects that were decided to be supported by TÜBİTAK and AA is shared below. 

PORTABLE ULTRASONIC POWER METER (PUG) DEVICE

* It was published in the Official Gazette dated 06/08/2018 and numbered 30501.

"Portable Ultrasonic Power Meter (PUG) Device Technology" developed by TÜBİTAK will be transferred via non-exclusive licensing method for 5 (five) years in return for a technology transfer fee.

Technology Transfer Fee ((₺ (TL), Excluding VAT)

Advance Payment

100.000

Royalty

10% Royalty on the Sales Price of the Products Produced by the Licensee Using the Technology Subject to Transfer

Technology Transfer Method

Non-Exclusive Licence

Transfer Period

5 Years

INFORMATION ABOUT TECHNOLOGY

The technology is related to the calibration of the output powers of probes belonging to the ultrasonographic diagnostic (imaging) and treatment devices. With the help of the invention, the output powers of probes that is related to ultrasound diagnostic (imaging) and treatment devices can be determined.

The ultrasonic power meter device that makes ultrasonic power measurement from one place to another easily as a portable way, facilitates effective decision-making on the working performance of ultrasonic probes in order to determine whether the ultrasonic probes have the 5 output power specified in the manufacturer's catalogs for the purpose of determining in a practical, easy and fast manner whether they work effectively.

For detailed information, please send an e-mail to tto@tubitak.gov.tr.